PRODUCT USER MANUAL 

PORTABLE OXYGEN CONCENTRATOR 

MODEL NO: RespireEasy-Y5

Instruction Manual of Portable Oxygen Concentrator

Please read the instruction manual carefully before using the product

I.Product characteristics

◆◆Overviewe:Scope of application: This product is a portable outdoor design to provide oxygenabsorption outdoors, driving, travel and plateau environments.Health care function: through oxygen absorption can improve the body's oxygensupply condition, to achieve the purpose of oxygen supplement health care. Suitablefor middle-aged and elderly people, poor physique, plateau, climbers and other peoplwith different degrees of physiological hypoxia, can also relieve fatigue and altitudesickness after the consumption of heavy physical work.

 Product highlights:
A, Light and convenient, the product is equipped with portable and strap can beconvenient to carry and use.

B, Rechargeable and external battery, the product has an intemnal lithium battery canbe used for about 2 hours after the internal lithium battery powercan be used forthe external mobile power supply to continue to use.

◆◆Operational principle:This machine takes lithium battery power supply as the power source, takes air as theraw material, The original French imported molecular sieve is used to produce highpurity oxygen.

◆◆Note before use:During transportation, the oxygen concentrator shall be kept horizontally and not inverted.*Charge the device until it is fully charged before use.(Built-in battery model)No debris shall be placed at the bottom of the oxygen machine, and shall not place themachine on a soft surface such as bed or sofa.Prevent the decrease of oxygenconcentration caused by the air inlet blockage.Personnel not authorized by the Company shall not remove the shell.

Operating: Ambient temperature range:+5 C-40
CRelative humidity range: <80%
Atmospheric pressure range: 86kpa-106kpa

Ⅱ.Main technical parameters

1.

Product name	Portable oxygen concentrator (continuous model)
Brand & model	RESPIREASY-Y5
Oxygen flow	The flow rate is adjustable from 1 to 5 L
Oxygen Production Method	PSA method
Weight	2.2KG+0.03KG(Including internal battery)
Battery duration	About 2 hours(single battery)
Battery recharge time	Internal battery pack:s3h
Dimensions	195mm X110mm X216mm
Voltage power	AC100-240V/60Hz/50Hz
Atmospheric pressure range	86kpa~106kpa
Noise	≤60dB

                                                               1

2. Contact Information

Website:  www.airoxygenconcentrator.com

Email:  support@airoxygenconcentrator.com

Telr whatsapp: +86 18902540866

Manufacturer: Shenzhen Jiaxing Technolgy innovation Co.. Ltd.

3.Built-in battery capacity:12v-6400mAH

4. Adapter oulput: DC16.8 / 5A

Ⅲ . Part schematic diagram and function introduction

                                             Host Appearance Diagram

 

                                                                     2

◆◆Product accessories:
1. One oxygen production host                           5. One vehicle charging line
2. One charger                                                     6.Nasal oxygen tube: 1 PCs
3. Manual (warranty card attached)1PCS             7.One qualification certificate
4.One built-in battery                                          8. Black strap (optional)1 PCS
◆◆Display and key press description

   

◆Power input: connect the charging interface of the charger to the oxygen ◆generator.Oxygen outlet: oxygen outlet of the equipment after connecting the nasal ◆oxygen tubeInformation display: startup default is current oxygen flow L / ◆minute,Battery level: When oxygen production starts, the battery level shown on the displayis full. When the battery level reaches the last grid, please shut down the device intime and charge it.
1.Continuous oxygen production
◆"Flow +" button: press once to increase 1L flow, and the maximum flow is 5L"Flow-" ◆button: press 1L flow, and the minimum flow is 1L

Contact Information
Website: www.airoxygenconcentrator.com
Email: support@airoxygenconcentrator.com
Tel/ Whatsapp:+86 18902540866
Manufacturer: Shenzhen Jiaxing Technology Innovation Co., Ltd.

                                                                   3

Battery disassembly and assembly mode,
As shown in (Figure 1/ Figure 2)      

 

Push up and lock, as shown in the locked state    Push down to unlock, as shown in the unlock state

                                                                    Figuret 1

 

 

 

 

       

Figure 2 shows: The battery can be pulled out
                                                                       Figure 2

                                                                          4

IV. Portable Oxygen Concentrator Instructions

Note: Before using the oxygen generator, please fill the built-inbattery for reuse

1. Insert the charger charging head into the input power hole first, and charge the built-in battery of the oxygen generator. The power supply of the charger is always bright,charge until the battery is full, and the charging time is about 3-5 hours
2. Insert the interface of the nasal oxygen tube into the host oxygen outlet.
3.Press "switch" to start the host to start oxygen.
4. Wear the nasal oxygen tube and start taking oxygen.
5.The machine is always running by default.
6. The machine defaults to 1L output of flow. lf you feel the oxygen output is not large.you can press the flow key to select more flow.
7. Press the "switch" to turn off the main mechanism oxygen when not taking oxygen.

Schematic diagram of nasal suction tube

         

                                                                 5

Treatment and maintenance when used for a long time idle

Host: When not in use for a long time, it should be charged once every 2-3months, and packaged and stored in a dry and dark place.

Nasal oxygen tube is a disposable product. Please pay attention to hygienewhen using it many times.

First-class filter air intake: The main function of air filter cotton is to filter andattach dust and impurities in the air.

Over time, air intake blockage will be formed, which will affect the oxygenproduction effect of the oxygen machine. Please replace it in time.

Note:    Failure to install or replace the filter cotton for a long time may affect equipmentperformanceor damage the equipment.

Please replace the filter cotton in a timely manner.and the replacement cycle depends on theuse environment and usage. Generally, it isreplaced once a month.

Fault investigation

Order number	Fault phenomenon	Possible cause	Resolvent
1	The oxygen concentratodoes not function properyand the screen does notdisplay.	The device is notconnected to the charger.	Connect to the charger for use.
		The device battery is notcharged.	Connect the charger for full ycharge.
2	The screen display isnormal, and the oxygenmachine does not make anormal operating sound	Oxygen machinecomputer board dead.	Shut off and wait fiveminutes to restart.
		Compressor function failure.	Contact the oxygen concentrator seller.
3	The screen display isnormal. with a normaloperation sound, but nooxygen output.	The intake air filter cottonis too dirty and blocked.	Shutdown down and replacethe intake filter cotton.
		The output hose is bentand blocked.	Turn off, replace the hose orspread the bent hose.
		Failure has occurred insidethe oxygen concentrator.	Contact the oxygen concentrator seller

                                                                         6

Product after-sales service (warranty) card

1. Please fill in the following information in time after purchasing the products, andsend this card back to the company within seven working days, subject to the localpostmark, otherwise, the user is deemed to have automatically given up the after-salesservice(warranty).3

2. Before using the product, please read the product manual and this card carefully,and keep the card properly.No card,Can not enjoy the product after-sales service (warranty).

3. Please fill in the receipt with neat and complete handwriting (customer retention ).

Product name:		Product model:		Date of manufacture:
Sales Unit Name:
Purchase Address:
Date of purchase:		Invoice number:
Your name:		Your phone number:
Zip code:		Your mobile phone:
Your address:
Maintenance record
Delivery date	Mlaintenance date	|Failure cause	Maintenance unit	Deal with the situation	Seal of maintenance worker

 

4.The following scope is not in the scope of free service

purchased for more than one year / human damage / not operating according to the instructions / force majeure event caused byproduct failure / not provided valid product warranty card / machine has been artificially disassembled.

Product after-sales service(warranty) card 1.Please fill in the following information in time after purchasing the products, andsend this card back to the company within seven working days, subject to the localpostmark, otherwise, the user is deemed to have automatically given up the after-salesservice(warranty). 2. Before using the product, please read the product manual and this card carefully,and keep the card properly.No card,Can not enjoy the product after-sales service (warranty). 3. Please fill in the receipt with neat and complete handwriting (customer retention ).
	Product name:		Product model:		Date of manufacture:
	Sales Unit Name:
	Purchase Address:
	Date of purchase:		Invoice number:
	Your name:		Your phone number:
	Zip code:		Your mobile phone:
	Your address:
	Maintenance record
	Delivery date	Mlaintenance date	|Failure cause	Maintenance unit	Deal with the situation	Seal of maintenance worker
4.The following scope is not in the scope of free service purchased for more than one year / human damage / not operating according to the instructions / force majeure event caused byproduct failure / not provided valid product warranty card / machine has been artificjally disassembled.

                                                                                 7